QA-T22
Drivers : 19 - Validating Generic-Serial via RS232/DB9
OBJECTIVE
This test focuses on testing both sending and receiving data between your Mac and Edge IO via the RS-232/DB-9 Serial Cable.
For this test, use a Mac laptop and an Edge IO!
(This test case could be also run on IO Gateway but it's not necessary:
If testing IO Gateway, use a Path Matcher: /dev/ttyO4 when setting up Generic Serial driver)
For this test, use a Mac laptop and an Edge IO!
(This test case could be also run on IO Gateway but it's not necessary:
If testing IO Gateway, use a Path Matcher: /dev/ttyO4 when setting up Generic Serial driver)
PRECONDITION
- Note: RS232 test case QA-T22 is tested with Mac and Edge IO
- You have a Mac computer
- You have a DB-9/RS232 Cable
- You have a running Edge IO registered to a Factory Instance (qa.tulip.co)
- You have access to the Edge IO's Device Portal
- You have access to the Factory Instance where your Edge IO is registered to
- You have access to 1Pass
- You have access to the 'Unit Test' app
- You can SSH into the Edge IO
Covers
overview