Testing
As part of LTS11, Tulip has deprecated many user requirements (URs). See user requirement tab for explanation. Some test cases referenced below still contain references to deprecated URs. As part of phasing them out, they will be removed at the next release.
Tests
| ID | Name |
|---|---|
| QA-T4 | User Management : 01 - Create new administrator account |
| QA-T5 | User Management : 02 - Receive welcome e-mail and registration link |
| QA-T10 | User Management : 04 - Log in with new admin |
| QA-T11 | User Management : 05 / Cannot Create an Admin with an empty or used Email |
| QA-T12 | User Management : 06 - Add phone number to admin account |
| QA-T13 | User Management : 07 - Upload image/gif for Admin icon on /account |
| QA-T16 | User Management : 08 - Create new operator account |
| QA-T17 | User Management : 09 - Login to /player using new badge ID |
| QA-T19 | Pre-auth : 01 - Setup Step 1 - Setting up a password for EdgeIO and EdgeMC |
| QA-T21 | Pre-auth : 03 - Setup Step 2 - Network Configuration (DHCP to same Static IP) |
| QA-T22 | Drivers : 19 - Validating Generic-Serial via RS232/DB9 |
| QA-T23 | Post-auth : 01 - Factory Reset via Button |
| QA-T24 | Post-auth : 02 - Factory Reset from Device Portal |
| QA-T25 | Pre-auth : 07 - Setup Step 3 - Connect Edge Device to Tulip Account |
| QA-T34 | Pre-auth : 06 - Setup Step 2 - Network Configuration (different static IP to DHCP) |
| QA-T36 | Pre-auth : 05 - Setup Step 2 - Network Configuration (DHCP to different static IP) |
| QA-T37 | Pre-auth : 04 - Setup Step 2 - Network Configuration (same Static IP to DHCP) |
| QA-T38 | Pre-auth : 11 - HTTP Proxy set up |
| QA-T40 | Drivers : 01 - Kolver torque tool |
| QA-T42 | Common : 04 - Access Point enabled for Edge Device during factory reset |
| QA-T43 | Common : 05 - Factory reset re-enables Access Point |
| QA-T44 | Common : 01 - Edge Device Access Point uses network range 10.0.3.x with Edge Device at 10.0.3.1 |
| QA-T45 | Common : 03 - Edge Device Access Point redirects all URLs to Device Portal |
| QA-T46 | Common : 08 - Edge Device boots with Access Point and State Condition indicators during Setup |
| QA-T48 | Common : 09 - Edge Device's Access Point can remain disabled after Setup |
| QA-T49 | Drivers : 02 - Ohaus scale |
| QA-T53 | Common : 11 - Edge Device updated while the Access Point is disabled |
| QA-T54 | Common : 12 - Start the Edge Device's Access Point via "A" button (EdgeIO and IO Gateway) |
| QA-T56 | Variable Widget : 01 - Simple variables in canvas can be changed to compound variables |
| QA-T57 | Variable Widget : 02 - Record View: Compound variables can be used with triggers |
| QA-T58 | Variable Widget : 03 - Simple variables can have their size, color, and style options modified. |
| QA-T59 | Variable widget : 04 - Compound variables can reorder, delete and restore fields |
| QA-T60 | Variable widget : 05 - Compound variables can have their size, color, and style options modified. |
| QA-T61 | Variable widget : 06 - Magic variables can have their size, color, and style options modified. |
| QA-T62 | Variable widget : 07 - Testing variables and compound variables in app |
| QA-T64 | Pre-auth : 09 - Mac address for EdgeIO and EdgeMC |
| QA-T65 | Common : 14 - Device Portal - Network Configuration persist through reboot |
| QA-T66 | Common : 13 - Device Portal - Network Configuration: can add custom DNS server (8.8.8.8.) |
| QA-T67 | Common : 15 - Device Portal - Network Configuration reset during Factory reset |
| QA-T69 | Common : 02 - Activate Remote Access Session on Edge Device in factory reset state |
| QA-T70 | Common : 17 - Activate Remote Access Session via "B" button (no active session) |
| QA-T72 | Common : 19 - Remote Access Session activation from Device Portal |
| QA-T73 | Common : 20 - Remote Access Session renewal from Device Portal |
| QA-T74 | Common : 21 - Stop Remote Access Session from Device Portal |
| QA-T76 | Common : 22 - Device Portal disables Remote Access Session when it's disabled from the Terminal |
| QA-T77 | Common : 23 - Device Portal recovers when the Remote Access Session no longer exists |
| QA-T78 | Common : 25 - Remote Access Session expires after 24h |
| QA-T79 | Common : 24- Remote Access Session survives restart |
| QA-T80 | Table Management : 01 - Create a table |
| QA-T81 | Table Management : 02 - Archive a table |
| QA-T82 | Table Management : 03 - Restore an Archived table |
| QA-T83 | Table Management : 04 - Edit a table's name and description |
| QA-T84 | Table Management : 05 - Add columns to a table |
| QA-T85 | Table Management : 06 - Edit a table column |
| QA-T86 | Table Management : 07 - Edit a table column description |
| QA-T87 | Table Management : 08 - Delete a table column |
| QA-T88 | Table Management : 09 - Restore a deleted table column |
| QA-T89 | Table Management : 10 - Reorder table columns |
| QA-T90 | Table Management : 11 - Resize table columns |
| QA-T91 | Drivers : 03 - GPIO Break Beam |
| QA-T92 | Table Management : 12 - Create table records from the table detail page |
| QA-T93 | Table Management : 13 - Sort table records by column in table view |
| QA-T94 | Table Management : 14 - Load multiple pages of table records in table view |
| QA-T98 | Record Placeholders : 04 - Load Table Records Trigger, and Table Record Widget |
| QA-T99 | Record Placeholders : 05 - Create and Load Table Record Trigger |
| QA-T100 | Record Placeholders : 06 - Table Data Tab |
| QA-T101 | Analytics - Table Analytics |
| QA-T102 | Record Placeholders : 01 - Add a record placeholder to an app |
| QA-T103 | Record Placeholders : 02 - Edit a record placeholder in an app |
| QA-T104 | Record Placeholders : 03 - View the table for a record placeholder |
| QA-T105 | Common : 10 - Remote Access Session survives update |
| QA-T106 | Signature Step : 01 - A signature form can be created |
| QA-T107 | Signature Step : 02 - Signature widgets cannot be deleted from a signature form step and additional ones cannot be created |
| QA-T108 | Signature Step : 03 - Signature form should allow any user to submit it when configured so |
| QA-T109 | Signature Step : 04 - Signature form should allow only the current user to submit it when configured so |
| QA-T110 | Signature Step : 05 - Signature forms should only be submittable a single time per process run |
| QA-T111 | Signature Step : 06 - Signature forms should display the user name and timestamp of submission in data exports |
| QA-T112 | Signature Step : 07 - LDAP Signature Widgets should accept a correct username/password pair |
| QA-T116 | Machine Monitoring : 06 - Machine Outputs |
| QA-T119 | Group-Restricted LDAP : 01 - Sysadmin accounts can log in |
| QA-T120 | Group-Restricted LDAP : 02 - Users in the configured admin group can log in |
| QA-T121 | Group-Restricted LDAP : 03 - Users operator group can log in |
| QA-T122 | Group-Restricted LDAP : 04 / Admins should not be able to create Users |
| QA-T123 | Group-Restricted LDAP : 05 - Deactivated users should still be able to log in |
| QA-T126 | News Feed : 01 - Activity History and Activity Records |
| QA-T127 | Connectors : 01 - Duplicate, Edit, Delete, Restore Connectors |
| QA-T133 | Record Placeholders : 07 - Delete Table Record |
| QA-T134 | Record Placeholders : 08 - Delete Record Placeholder |
| QA-T135 | Custom Barcode Scanner : 01 - Add Custom Barcode Scanner dialog renders correctly (Windows) |
| QA-T137 | Custom Barcode Scanner : 02 - Add Custom Barcode Scanner validation works (Windows) |
| QA-T139 | Custom Barcode Scanner : 03 - Adding and removing devices (Windows) |
| QA-T140 | Custom Barcode Scanner : 04 - Vendor ID and Product ID fields can accept hexadecimal values (Windows) |
| QA-T142 | Post-auth : 21 - Device Portal - Certificate bundle upload |
| QA-T147 | SQL Connectors : 01 - Add a SQL Connector |
| QA-T148 | SQL Connectors : 02 - Add Function to SQL Connector |
| QA-T150 | Edge Devices Page : 01 - List all Edge devices/IO Gateway devices |
| QA-T151 | Edge Devices Page : 02 - Adding an Edge device/IO Gateway device shows up on the Edge Devices page |
| QA-T152 | Edge Devices Page : 03 - Removing an Edge device/IO Gateway device removes it from the Edge Devices page |
| QA-T153 | Form Widgets : 06 - Photo Widget |
| QA-T154 | Edge Devices Page : 04 - Open Edge Devices portal |
| QA-T155 | Edge Devices Page : 06 - Triggering an OTA (Over the Air) upgrade of an Edge device/IO Gateway device |
| QA-T156 | Edge Devices Page : 05 - Cancelling a queued OTA (Over the Air) update |
| QA-T157 | Input Widgets : 01 - Boolean widget |
| QA-T160 | App Editor Misc - Verify Keyboard Shortcuts Work |
| QA-T170 | SAML : 01 - Sysadmin accounts can log in on SAML |
| QA-T171 | SAML : 02 - Admins can log in to Factory using SAML |
| QA-T172 | SAML : 04 - Operators can log into Player using SAML |
| QA-T173 | SAML : 05 - Operators should not be allowed to login to Factory on SAML |
| QA-T174 | SAML : 03 - Admins should be able to log into Player |
| QA-T176 | SAML : 06 - Deactivated users can still log into SAML with IdP Control Mode |
| QA-T179 | Drivers : 18 - Generic Zebra Printer |
| QA-T183 | Triggers - Print Using System Dialog Trigger |
| QA-T187 | Post-auth : 16 - Diagnostics Test- Network Health |
| QA-T188 | Post-auth : 06 - Diagnostics Test- CPU Info |
| QA-T189 | Post-auth : 07 - Diagnostics Test- eMMC Manufacturer Info |
| QA-T190 | Post-auth : 08 - Diagnostics Test- Front End |
| QA-T191 | Post-auth : 09 - Diagnostics Test-OS Info and Hardware Revision |
| QA-T192 | Post-auth : 10 - Diagnostics Test-Partition Info |
| QA-T193 | Post-auth : 11 - Diagnostics Test- Tulip Packages Info |
| QA-T194 | Post-auth : 12 - Diagnostics Test - Firmware Checksum Info |
| QA-T195 | Post-auth : 13 - Diagnostics Test- Date Time Info |
| QA-T197 | Post-auth : 03 - Logs Test - Generating and Updating |
| QA-T199 | Post-auth : 04 - Logs Test - Filters |
| QA-T200 | Post-auth : 05 - Logs Test - Word Wrap, Copy to ClipBoard |
| QA-T205 | Pre-release : 01 - Initialization |
| QA-T207 | Analytics - Completion Data can be Ignored by Analytics |
| QA-T208 | Analytics - Analytics Widget |
| QA-T212 | General & Logs : 02 - Logs stored on user's OS (Windows) |
| QA-T213 | Toolbar functionality : 02 - About Dialog Box |
| QA-T219 | Player messages : 01 - Lost connection message |
| QA-T220 | Toolbar functionality : 01 - File, View, Tools |
| QA-T222 | Player registration : 01 - Registering Player |
| QA-T223 | Toolbar functionality : 03 - Developer options |
| QA-T224 | Proxy Testing : 1 - Auth'd credentials - with and without proxy (Windows) |
| QA-T225 | Touch and Scrolling : 2 - Onscreen Keyboard functionality |
| QA-T228 | Storage : 03 - Settings persist across restarts |
| QA-T230 | Localization : 08 - Localization - Proxy Login (Windows) |
| QA-T232 | Proxy Testing : 4 - Proxy Testing for Updater (Mac) |
| QA-T234 | Variable Widget : 08 - Table Records Can be Styled |
| QA-T235 | User Table : 01 - User Table |
| QA-T239 | HTTP Connectors : 01 - Add an HTTP Connector |
| QA-T240 | HTTP Connectors : 02 - Add several functions to HTTP Connector |
| QA-T241 | Embedded Tables : 01 - Embed a Tulip Table in an app |
| QA-T242 | Embedded Tables : 02 - Sort an embedded table |
| QA-T243 | Embedded Tables : 03 - Connect an embedded Tulip Table to a Table record |
| QA-T244 | Embedded Tables : 04 - Filter an embedded table |
| QA-T245 | Embedded Tables : 05 - Handle deleted fields in embedded tables |
| QA-T246 | Embedded Tables : 06 - Handle a Tulip Table change in an embedded table |
| QA-T256 | Machine Monitoring : 04 - Machine Type |
| QA-T257 | Machine Monitoring : 07 - Machine Widgets |
| QA-T258 | Machine Monitoring : 08 - App Triggers For Machines |
| QA-T259 | Analytics - Machine Analytics |
| QA-T260 | User Roles : 01 - Account Owners can add other Account Owners |
| QA-T261 | User Roles : 03 - Account Owners can edit other users' profiles |
| QA-T262 | User Roles : 02.1 - Account Owners can create new Account Owners |
| QA-T263 | User Roles : 04 - Account Owners should be able to deactivate/reactivate users |
| QA-T264 | User Roles : 05 / Administrators should not be able to manage users |
| QA-T265 | User Roles : 06 / Tulip Table Supervisors should not be able to manage connectors |
| QA-T266 | User Roles : 07 / Tulip Table Supervisors should not be able to manage the shop floor |
| QA-T267 | User Roles : 08.1 / Viewers should be unable to run Apps or edit/modify Apps, Dashboards, and Analytics |
| QA-T279 | User Management : 10 - Users can change their password |
| QA-T280 | Analytics - Analytics Widget Filtering |
| QA-T281 | Analytics - Analytics Widget Filtering (Machine-based) |
| QA-T282 | NanoPi specific : 07 - LAN Ethernet connection (10.0.5.1) |
| QA-T284 | NanoPi specific : 06 - Device Portal login page |
| QA-T287 | NanoPi specific : 05 - Connector host Mongo test |
| QA-T288 | NanoPi specific : 04 - Connector host basics |
| QA-T289 | NanoPi specific : 03 - Setting up OPCUA Connector |
| QA-T292 | Settings SAML Config : 01 - Form shows an error when a non-SAML file is uploaded |
| QA-T293 | Settings SAML Config : 02 - Form shows an error when a non-XML file is uploaded |
| QA-T294 | Settings SAML Config : 03 - Upload IdP metadata file |
| QA-T295 | Settings SAML Config : 04 - Configure SAML Settings |
| QA-T298 | Settings SAML Config : 05 - Test Authentication |
| QA-T299 | mobile : 17 - Camera Tests |
| QA-T302 | Configuration and Apps : 01 - Create, Edit, and Delete Camera |
| QA-T303 | Configuration and Apps : 02A - Assign Camera to a Physical Camera |
| QA-T304 | Configuration and Apps : 03 - Create, Edit, and Delete a Region |
| QA-T305 | Configuration and Apps : 05A - Apps can use Vision Cameras and Regions |
| QA-T308 | Configuration and Apps : 07 - User permissions get checked when viewing video |
| QA-T311 | Configuration and Apps : 14A - Create new Change Detector |
| QA-T312 | Configuration and Apps : 05C - Handling Plug Events and Player Online/Offline Events for Cameras page |
| QA-T314 | Configuration and Apps : 08B - Video stream keeps playing for 1 hour |
| QA-T317 | Post-auth : 22 - Device Portal - Date time set fallback - Edge IO and Edge MC |
| QA-T318 | Support Actions - Reach out to Tulip |
| QA-T319 | Support Actions - Support Links |
| QA-T320 | Support Actions - Player Download |
| QA-T321 | Apps Page OLD : 01 - Sidebar behavior |
| QA-T322 | Apps Page : 02 - App Folder Manipulation |
| QA-T323 | Apps Page OLD : 03 - App Manipulation |
| QA-T324 | Apps Page : 04 - App Overview |
| QA-T325 | Apps Page : 07 - App Permissions |
| QA-T327 | Apps Page : 05 - App Versions |
| QA-T328 | Apps Page : 06 - App Completions Export Data |
| QA-T329 | Apps Page : 08 - App Approvals Setup |
| QA-T330 | Apps Page : 09 - App Approvals during Publishing |
| QA-T331 | LDAP Tulip Managed : 01 - Creating Users |
| QA-T332 | LDAP Tulip Managed : 02 - Users can log in via LDAP |
| QA-T333 | LDAP Tulip Managed : 03 - Deactivated Users can't Log In |
| QA-T334 | Stations Page - Player Authorization |
| QA-T335 | Stations Page - Station and Station Group Management |
| QA-T336 | Stations Page - Station App Configuration |
| QA-T337 | Stations Page - Live Preview and Player Control |
| QA-T338 | Widgets - Shapes Widget (and aesthetic changes) |
| QA-T339 | Widgets - Text Widget |
| QA-T340 | Widgets - Button Widget |
| QA-T341 | Widgets - Image Widget |
| QA-T342 | Widgets - Video Widget |
| QA-T343 | Widgets - Document Widget |
| QA-T344 | Widgets - Webpage Widget |
| QA-T346 | Form Step - Create Form Step |
| QA-T347 | Form Step - Running the Form Step |
| QA-T348 | Base Layout - Base Layout |
| QA-T349 | App Editor Misc - Player Menu |
| QA-T350 | App Editor Misc - Comments |
| QA-T351 | App Editor Misc - Step Overload |
| QA-T352 | Triggers - Basic Triggers App |
| QA-T353 | Analytics Template - Single Number |
| QA-T354 | Analytics Template - One Operation |
| QA-T355 | Analytics Template - Compare Variables |
| QA-T356 | Analytics Template - Multiple Axes |
| QA-T357 | Analytics Template - Table |
| QA-T358 | Analytics Template - Slideshow |
| QA-T359 | Analytics - Analytics Sharing |
| QA-T360 | Analytics - Analytics Copying |
| QA-T361 | Analytics - Analytics Refresh Rates |
| QA-T362 | Dashboards Page - Dashboard Management |
| QA-T363 | Dashboards Page - Dashboard Sharing |
| QA-T372 | Single Install : 02 - Authentication |
| QA-T373 | Single Install : 01 - Login |
| QA-T374 | Single Install : 03 - Clear all data |
| QA-T375 | Single Install : 04 - Instance locking |
| QA-T376 | Device Drivers : 01 - Digital Caliper |
| QA-T377 | Verifying Completions |
| QA-T384 | Settings Page - Player Settings |
| QA-T386 | Apps Page : 10 - App Testing during Approvals |
| QA-T387 | User Management : 11 - User Deactivation |
| QA-T390 | Machine Monitoring : 05 - Machine Type Management |
| QA-T394 | Configuration and Apps : 06 - Test Snapshot Feature with regions |
| QA-T395 | Post-auth : 14 - Diagnostics Test- Device Info |
| QA-T397 | Table Links : 01 - Creating Table Links |
| QA-T398 | Table Links : 02 - Linking Records via Details Page |
| QA-T399 | Table Links : 03 - Linking Records via App Triggers |
| QA-T400 | Table Links : 04 - Deleting Linking Columns |
| QA-T401 | Configuration and Apps : 11 - Create (train) a new Jig |
| QA-T402 | Configuration and Apps : 10 - Create, Edit, Delete a Jig Detector |
| QA-T403 | Configuration and Apps : 13 - Edit, Delete a Jig |
| QA-T404 | Configuration and Apps : 12 - Test Jig Enter/Exit region and Appear/Disappear events |
| QA-T409 | NanoPi specific : 01 - WiFi connection |
| QA-T410 | Machine Monitoring : 09 - Used Machine Type Aspects can't be Deleted |
| QA-T415 | Driver Configuration : 03 - Enable Drivers from Factory (Mac) |
| QA-T416 | Driver Configuration : 04 - Disable Drivers from Factory (Mac) |
| QA-T420 | Configuration and Apps : 23 - Create, edit, delete Color detector |
| QA-T422 | Localization : 05 - Player registration UI menu bar |
| QA-T423 | Configuration and Apps : 24 - Test color detection began/ended events |
| QA-T424 | Localizations : 01 - Pick Server |
| QA-T425 | Localizations : 04 - About dialog |
| QA-T426 | Localizations : 02 - Instance login |
| QA-T427 | Localizations : 07 - Scan Barcode dialog |
| QA-T429 | Localizations : 06 - Update dialog |
| QA-T430 | Localizations : 03 - Network error page |
| QA-T431 | Device Drivers : 02 - Omega OS-MiniUSB temperature sensor |
| QA-T433 | mobile : 6 - Mobile Device Version Release |
| QA-T443 | Node-Red : 01 - Install library in Node-Red |
| QA-T444 | Node-Red : 04 - Factory reset clears Node-Red |
| QA-T447 | Common : 06 - Additional Information panel |
| QA-T448 | Common : 07 - Device Portal display QR code and Barcodes |
| QA-T449 | Common : 16 - Wired Network Conditions Update when Disconnected |
| QA-T456 | Player messages : 02 - Unknown URL message |
| QA-T458 | Variable modal : 01 - Create and modify a variable |
| QA-T459 | Variable modal : 02 - Variables need to have unique names |
| QA-T460 | Variable modal : 03 - Managing variables created within the app |
| QA-T461 | Variable modal : 04 - Variable's parameters |
| QA-T462 | Variable modal : 05 - Managing variables on the modal |
| QA-T463 | Variable modal : 06 - Deleting variables |
| QA-T464 | Tables CSV Import : 01 - Import to table |
| QA-T466 | Tables CSV Import : 02 - Import feature data handling |
| QA-T467 | Tables CSV Import : 03 - Import from export |
| QA-T468 | Schedules and Shifts : 01 - Create a schedule with shifts |
| QA-T469 | Schedules and Shifts : 02 - Applying shifts in apps |
| QA-T473 | Schedules and Shifts : 03 - Applying shifts in analytics |
| QA-T474 | Schedules and Shifts : 04 - Managing shifts and schedules |
| QA-T475 | Schedules and Shifts : 05 - Working Days modal |
| QA-T477 | Input Widgets : 02 - Text widget |
| QA-T478 | Input Widgets : 03 - Number widget |
| QA-T479 | Input Widgets : 04 - Single Select widget |
| QA-T480 | Input Widgets : 05 - Multiselect widget |
| QA-T481 | Input Widgets : 06 - Date picker widget |
| QA-T482 | Input Widgets : 07 - Image widget |
| QA-T483 | Form Widgets : 01 - Boolean widget |
| QA-T485 | Form Widgets : 02 - Dropdown widget |
| QA-T486 | Form Widgets : 03 - Multiselect widget |
| QA-T487 | Form Widgets : 04 - Text widget |
| QA-T488 | Form Widgets : 05 - Number widget |
| QA-T491 | Barcode Widget: 01 - Create a barcode via variable |
| QA-T492 | Barcode Widget: 02 - Create a barcode via app info |
| QA-T493 | Settings Page - Version Verification |
| QA-T494 | Barcode Widget: 03 - Create a barcode via Tulip table record |
| QA-T495 | Barcode Widget: 04 - Create a barcode via static value |
| QA-T496 | Stations Page - Player Driver Configuration |
| QA-T497 | Expression Editor : 01 - Create an expression in an app trigger |
| QA-T499 | Player registration : 02 - Running apps can change Player server |
| QA-T501 | Copying Triggers : 01 - Copying and pasting triggers between buttons |
| QA-T502 | Copying Triggers : 02 - Copying and pasting triggers between image widgets |
| QA-T503 | Touch and Scrolling : 1 - Touch and Scroll tests |
| QA-T504 | Copying Triggers : 03 - Copying and pasting triggers between Interactive Tables |
| QA-T505 | Copying Triggers : 04 - Copying and pasting Step Triggers |
| QA-T506 | Copying Triggers : 05 - Copying and pasting App Triggers between apps |
| QA-T507 | Date and Time: 01 - Current Timezone |
| QA-T508 | Date and Time: 02 - Default Timezone |
| QA-T509 | Date and Time: 03 - Custom Datetime Format |
| QA-T510 | Color Palette - Set Default Options |
| QA-T511 | Network Access - Enabling the IP Allowlist |
| QA-T512 | Timer Widget : 01 - Default Configuration |
| QA-T513 | Timer Widget : 02 - Target Time Configuration |
| QA-T514 | Timer Widget : 03 - Target Time with Table Records and Static Values |
| QA-T515 | Base Layout - Widget triggers |
| QA-T516 | Base Layout - Step and App Triggers |
| QA-T517 | Input Widgets : 08 - Linking Tulip Table Records |
| QA-T518 | Widgets - Grid Widget |
| QA-T519 | Widgets - Gauge Widget |
| QA-T520 | User Table : 02 - Users Table Export |
| QA-T521 | Expression Editor : 02 - Running the "Expressions" app |
| QA-T523 | Apps Page : 11 - Multiple Approvals for Apps |
| QA-T538 | Table App - Run the 'Table App' application |
| QA-T558 | Single Install : 06 - Migration to operator auth from badge Id mode |
| QA-T559 | Single Install : 05 - Migration to badge Id from operator auth mode |
| QA-T563 | Node-Red : 9 - Send data to Machine API |
| QA-T564 | Node-Red : 13 - Read from Edge MC serial port (UART Cable) |
| QA-T565 | Node-Red : 10 - Send data to Tulip Table API |
| QA-T567 | Dev Mode - Environment and Player Settings |
| QA-T568 | Dev Mode - Variables and Table Records |
| QA-T569 | Dev Mode - Completions are not Saved |
| QA-T570 | Table Queries : 01 - Create, Edit, Delete a Query |
| QA-T571 | Table Queries : 02 - Query Configuration |
| QA-T572 | Table Queries : 03 - Create, Edit, Delete an Aggregation |
| QA-T573 | Table Queries : 04 - Aggregation Configuration |
| QA-T574 | Table Queries : 05 - Queries in Apps |
| QA-T576 | Configuration and Apps : 18 - Test Person ROI enter and exit events |
| QA-T577 | Post-auth : 18 - Removing NTP server check |
| QA-T578 | Post-auth : 17 - Adding NTP Server check |
| QA-T579 | API Tokens : 01 - Creating, Editing, and Disabling API Tokens |
| QA-T580 | Dev Mode Settings - Dev Mode Configuration |
| QA-T581 | Connectors : 02 - Environment Configuration |
| QA-T582 | Approval Type - Approval Type Configuration |
| QA-T583 | Step Tab - Step and Step Group Configuration |
| QA-T586 | Barcode Widget: 05 - QR Code Configuration |
| QA-T587 | Machine Monitoring : 11 - Adding Machine Activity Fields |
| QA-T588 | Machine Monitoring : 12 - Adding Machine Activity Fields to Machine Types |
| QA-T589 | Machine Monitoring : 13 - Modifying Machine Activity Fields |
| QA-T590 | Machine Monitoring : 14 - Creating Machine Downtime Reason |
| QA-T591 | Machine Monitoring : 15 - Editing and Deleting Machine Downtime Reasons |
| QA-T594 | Table Queries : 06 - Table Queries with App Inputs as Filters |
| QA-T595 | Table Queries : 08 - Editing and Deleting Queries, Aggregations in Published and Development Version Apps |
| QA-T596 | Widgets - Record History Widget |
| QA-T602 | Tulip Library : 01 / Failed Import when User Lacks Permission |
| QA-T603 | Tulip Library : 01 - Installing Content from Tulip Library |
| QA-T612 | Configuration and Apps : 16 - Test text detected events using OCR detector |
| QA-T614 | Configuration and Apps : 22A - Test datamatrix detected events using Datamatrix detector |
| QA-T621 | Post-auth : 15 - Diagnostics Test- DHCP Leases |
| QA-T623 | Node-Red : 02 - Tulip read-only library |
| QA-T624 | NanoPi specific : 02 - Initial Node-Red state after OS deployment |
| QA-T625 | Node-Red : 03 - Preinstalled library check |
| QA-T628 | Common : 18 - EdgeIO Remote Access Session light |
| QA-T630 | Node-Red : 15 - Tulip connector functions can trigger Edge IO Node-RED to read and write GPIO |
| QA-T633 | Edge IO : 01 - HDMI connection starts Player |
| QA-T634 | Edge IO : 02 - Player authentication with a mouse and keyboard |
| QA-T636 | Workspaces : 01 - Login with different roles |
| QA-T637 | Workspaces : 02 - Account settings page |
| QA-T638 | Workspaces : 03 - Workspace Settings page |
| QA-T639 | Workspaces : 04 - Date and Time |
| QA-T646 | Configuration and Apps : 20 - Test Barcode detected events using Barcode detector |
| QA-T647 | Workspaces : 05 - Create a schedule with shifts for different workspaces |
| QA-T648 | Workspaces : 06 - Device uptime |
| QA-T649 | Workspaces : 07 - Approvals in workspaces |
| QA-T651 | Signature Step : 07 / LDAP Signature Widgets should reject wrong/empty passwords |
| QA-T653 | LDAP Tulip Managed : 01 / Creating a User with the same name |
| QA-T655 | LDAP Tulip Managed : 02 / Operators can't log into Factory via LDAP |
| QA-T656 | Workspaces : 08 - Connectors across the workspaces |
| QA-T657 | Workspaces : 09 - Machine Types are shared between workspaces |
| QA-T660 | User Management : 03 / Password Creation for New Admin with wrong input |
| QA-T661 | User Management : 06 / Try to add phone number with a false Verification Code |
| QA-T663 | User Management : 08 / Trying to create New Operator Account without entering a name/with a Badge ID in use |
| QA-T665 | General & Logs : 01 - Quit hotkeys |
| QA-T666 | General & Logs : 03 - Logs stored on user's OS (Mac) |
| QA-T668 | Localizations : 09 - Localization - Proxy Login (Mac) |
| QA-T670 | Proxy Testing : 2 - Proxy Testing for Updater (Windows) |
| QA-T671 | Proxy Testing : 3 - Auth'd credentials - with and without proxy (Mac) |
| QA-T673 | General & Logs : 05 - Factory logger |
| QA-T674 | Storage : 01 - Storage path can be configured (Windows) |
| QA-T675 | Storage : 02 - Storage path can be configured (Mac) |
| QA-T676 | Update : 03 - Update from current prod version to new QA alpha version |
| QA-T677 | Update : 02 - Update from Beta version to Infinity release (Windows) |
| QA-T678 | Update : 04 - Update from Alpha version to Infinity release (Mac) |
| QA-T679 | Triggers - Sleep Trigger |
| QA-T680 | New User Onboarding : 01 - Existing user cannot access onboarding flow |
| QA-T692 | User Management : 03 - Password Creation for New Admin |
| QA-T693 | User Management : 03.2 - Onboarding sequence |
| QA-T695 | Schedules and Shifts : 01 / Create a schedule with shifts with wrong credentials |
| QA-T696 | Schedules and Shifts : 04 / Managing shifts and trying to delete schedules that are in use |
| QA-T698 | Dashboards Page / Failed Dashboard Creation |
| QA-T700 | Table Queries : 02 / Query for an Archived Field |
| QA-T701 | Record Placeholders : 07 / Attempting to Delete a Loaded Table Record |
| QA-T702 | Table Management : 05 / Table Columns must be named |
| QA-T703 | Table Queries : 07 - Unique value aggregation |
| QA-T704 | Table Management : 01 / Table name cannot be blank |
| QA-T705 | Table Management : 06 / Table Columns labels cannot be blank and ID column type cannot be modified |
| QA-T707 | Variable modal : 07 - Save for Analysis in Development Mode |
| QA-T708 | User Roles : 05 - Administrator role |
| QA-T709 | Record Placeholders : 01 / Record Placeholder Validation works |
| QA-T710 | Record Placeholders : 02 / Record Placeholders' names must be unique and can't be left blank |
| QA-T712 | Embedded Tables : 07 - Pagination in an embedded table |
| QA-T715 | Table Management : 04 / Cannot leave table name blank on edit |
| QA-T716 | Table Management : 12 / Table Record Data Validation |
| QA-T717 | Analytics - Table analytics CSV export |
| QA-T718 | Apps Page : 08 / Failing App Approvals Setup |
| QA-T719 | Apps Page : 07 / App Permissions - Unable to remove last owner if not account/workspace owner |
| QA-T720 | Apps Page : 05 / Failing to edit older App Versions |
| QA-T721 | Table Queries : 03 / Can't edit a saved Aggregation without clicking 'Edit' |
| QA-T722 | Machine Monitoring : 02 / Machine Attributes' name can't be left blank and must be unique |
| QA-T723 | Machine Monitoring : 01 / Machine Validation |
| QA-T725 | HTTP Connectors : 04 - Extractors for Non-Json Formats and Cookies |
| QA-T726 | SQL Connectors : 03 - Verify different SQL Servers |
| QA-T727 | HTTP Connectors : 03 - OAuth 2 Admin/Operator |
| QA-T728 | HTTP Connectors : 05 - Non-2xx Responses |
| QA-T729 | HTTP Connectors : 06 - HTTP Connector Functions perform the same with TLS on/off |
| QA-T731 | HTTP Connectors : 07 - OAuth 2 send request data as JSON |
| QA-T734 | Configuration and Apps : 04 - Test region filter in Factory |
| QA-T744 | Workspaces : 09 - News feed between workspaces |
| QA-T748 | Pre-auth : 08 - Setup Step 4 - Quick Configuration |
| QA-T749 | Workspaces : 10 / - Failing to create a new user with email registered in another workspace |
| QA-T750 | Workspaces : 11 / - Failing to run an app from another workspace |
| QA-T751 | Workspaces : 12 / - Workspace owner cannot access other workspaces |
| QA-T752 | General : 03 - Windows digital signature |
| QA-T755 | General : 01 - Disable Developer Menu via Config file |
| QA-T757 | Display Devices Page : 01 - Creating devices |
| QA-T758 | Display Devices Page : 01 / Device creation form validations |
| QA-T759 | Display Devices Page : 02 - Managing devices |
| QA-T760 | Display Devices Page : 03 - Bulk creation and pagination |
| QA-T761 | Display Devices Page : 03 / Bulk creation form validations |
| QA-T762 | Display Devices Page : 04 - Removing devices |
| QA-T763 | Signature Widget : 01 - Signature widget configuration |
| QA-T767 | Machine Monitoring : 02 - Attributes mapping. |
| QA-T768 | Machine Monitoring : 03 - Machine Configuration tab. |
| QA-T769 | Machine Monitoring : 04 - Undo/redo functions on machine page. |
| QA-T770 | Node-Red : 16 - Edge IO OPC UA Node-Red Library Flow connects to Tulip |
| QA-T771 | Node-Red : 14 - Library Flow: RS485 Rotary Encoder |
| QA-T773 | Machine Monitoring : 07 - Machine page features. |
| QA-T774 | Machine Monitoring : 01 - Single Machine page |
| QA-T776 | Machine Monitoring : 05 - Undo/redo functions on machine type page. |
| QA-T778 | Machine Monitoring : 02 - Machine Attributes. |
| QA-T779 | CELOS X : 01 - CELOS machine serial number managing |
| QA-T780 | CELOS X : 02 / CELOS machine serial number managing |
| QA-T782 | Table Queries : 09 - Multiple table aggregations in one app |
| QA-T783 | Machine Monitoring : 19 - Copy/cut/paste machine type triggers |
| QA-T791 | Widgets - 12: Widget Shift+Drag and Option+Drag Modifications |
| QA-T793 | Connectors : 03 - Filtering and searching connectors |
| QA-T794 | Connectors : 04 - "Where Used" app links |
| QA-T795 | Connectors : 05 - "Where Used" app links on different workspaces |
| QA-T796 | Connectors : 06 - Connector functions search and "Where Used" app links |
| QA-T802 | Connectors versioning : 01 - Connectors in published apps |
| QA-T803 | Advanced Analytics : 01 - Control Chart Layer |
| QA-T804 | User Management : 12 - User Permission after Reactivation |
| QA-T805 | Android Only : 1 - Android - Hardware Back button takes you out of Tulip if Tulip Player not yet registered |
| QA-T806 | mobile : 31 - Mobile - Register Tulip Player |
| QA-T807 | Android Only : 2 - Android - Click on Hardware Back button before and after getting into an Open App |
| QA-T808 | Android Only : 3 - Android - Hardware Back button returns the user to App after navigating to a URL |
| QA-T809 | mobile : 34 - Mobile - Register Tulip Player on SAML enabled site |
| QA-T810 | mobile : 12 - HTTP Connectors : 03 - OAuth 2 Admin/Operator |
| QA-T811 | mobile : 27 - Mobile - Using the Camera and QR Smoke Test App |
| QA-T813 | Step Tab - Widget Manipulation |
| QA-T814 | Table Links : 05 - Linking Records via App Triggers |
| QA-T815 | Custom Widget: 01 - Create Custom Widget |
| QA-T819 | Advanced Analytics : 06 / Format Chart for Different Templates |
| QA-T820 | Advanced Analytics : 01 / Control Chart Layer |
| QA-T821 | CELOS X : 03 - Verifying the CELOS X data source |
| QA-T822 | CELOS X : 04 - Creating data flow for CELOS X |
| QA-T823 | Completions - Null Values in Completions |
| QA-T824 | Completions - All Variable Types in Completions |
| QA-T825 | Completions - Arrays in Completions |
| QA-T826 | Advanced Analytics : 07 / Red Tabs |
| QA-T827 | Signature Widget : 02 - Signee options and variables |
| QA-T828 | Signature Widget : 02 / Signee options and mandatory features |
| QA-T829 | Signature Widget : 03 - Signing in LDAP, SAML |
| QA-T830 | Signature Widget : 03 / Denied signing in LDAP, SAML |
| QA-T832 | Edge Device Data Source mapping |
| QA-T835 | Node-Red : 08 - Machine Data Source (Tests with Tulip Tags) |
| QA-T837 | Display Devices Page : 06 - Shareable Link - One time use |
| QA-T838 | Display Devices Page : 07 - Shareable Link - Reusable Links |
| QA-T839 | Input Widgets : 09 - Input Widget Labels |
| QA-T840 | HTTP Connectors : 08 - URL encoding function |
| QA-T841 | Embedded Tables : 08 - Displaying variable data source |
| QA-T842 | Post-auth : 19 - Enable MQTT Broker |
| QA-T843 | Post-auth : 20 - Disable MQTT Broker |
| QA-T846 | Settings Page - Connector Settings |
| QA-T850 | Customer Translations - Turn on Custom Translations |
| QA-T851 | Customer Translations - Run Custom Translations App |
| QA-T852 | Tulip Library : 02 - Adding Content to Tulip Library |
| QA-T853 | Custom Widget: 04 - Manage Custom Widgets |
| QA-T855 | General & Logs : 04 - Using the Camera on Player |
| QA-T857 | mobile : 51 - Join a Player Instance on a Mobile Device |
| QA-T866 | mobile : 46 - Settings drawer menu hides after logged in as Player user on Mobile Devices |
| QA-T867 | mobile : 45 - Settings drawer menu has a “Change Instance” option on Mobile Devices |
| QA-T870 | mobile : 20 - Support for Tulip URL deep linking on Mobile Device |
| QA-T874 | mobile : 24 - Viewport rotation tests of Tulip Player on Mobile Devices |
| QA-T875 | Update : 01 - Disable auto updates through global settings file (Windows) |
| QA-T880 | User Roles : 02.2 - Account Owners can create users other than Account Owners |
| QA-T882 | Rendering specific Files format - PDF. |
| QA-T883 | Rendering specific Files format - Images. |
| QA-T884 | Rendering specific Files format - Video. |
| QA-T885 | Rendering specific Files format - STL |
| QA-T895 | Machine Monitoring : 08 - Export Machine Data. |
| QA-T910 | mobile : 19 - Login with Google |
| QA-T911 | mobile : 36 - Network Connection Detection - if WiFi is off |
| QA-T913 | mobile : 38 - Register device with link |
| QA-T915 | mobile : 50 - Open settings panel from within the Player settings |
| QA-T918 | mobile : 3 - Clear instance data |
| QA-T920 | mobile : 1 - App should open in horizontal view |
| QA-T923 | Embedded Tables : 03 / Only matching record placeholders can be selected |
| QA-T924 | Loop test : 01 - Send a fixed amount of GPIN Events to Factory (GPIO Loop Test) |
| QA-T925 | Drivers : 20 - ADC Differential Test Jig |
| QA-T926 | Other IQC : 1 - Hardware revision check |
| QA-T927 | Table Analytics - Filtering by 'Date Range' settings |
| QA-T928 | Loop test : 02 - Creating a machine for GPIO Loop Test |
| QA-T930 | Node-Red : 17 - Disable flows button |
| QA-T935 | Player registration : 03 - Registering Player with display device link |
| QA-T937 | App Export/Import : 01 - Running the "Import-Export" app after import |
| QA-T938 | App Export/Import : 02 - Widgets are Imported and Function |
| QA-T939 | App Export/Import : 03 - Embedded Widgets are Imported and Function |
| QA-T940 | User Management : 13 - Online Status on Profile page |
| QA-T950 | mobile : 13 - Printing |
| QA-T974 | Analytics Template - Table |
| QA-T985 | Advanced Analytics : 02 - Forecast |
| QA-T987 | Advanced Analytics : 02 / Forecast |
| QA-T988 | Advanced Analytics : 03 - Trend Line |
| QA-T989 | Advanced Analytics : 03 / Trend Line |
| QA-T994 | User Management : 14 - Resume login handler |
| QA-T995 | Drivers : 17 - Edge IO GPIO Pins |
| QA-T997 | Drivers : 14 - Phidgets (Humidity/Temperature) |
| QA-T1001 | Drivers : 13 - Temp Gun (Humidity/Temperature) |
| QA-T1005 | Machine Monitoring : 10 - Data Source page. |
| QA-T1010 | Drivers : 04 - Tulip Light Kit (and Andon Light) |
| QA-T1014 | Device Drivers : 03 - Zebra Printer - With LAN Port |
| QA-T1015 | Device Drivers : 04 - Telnet General |
| QA-T1020 | Device Drivers : 05 - Zebra Printer with Player Serial (RS232) |
| QA-T1022 | Drivers : 08 - Barcode Scanner |
| QA-T1023 | Drivers : 09 - Lascar Humidity/Temperature sensor |
| QA-T1025 | Drivers : 10 - InSize and Mitutoyo calipers |
| QA-T1026 | Drivers : 11 - Brecknell Scale |
| QA-T1027 | Drivers : 12 - Dymo USB Scale |
| QA-T1028 | Drivers : 07 - Foot Pedal |
| QA-T1029 | Drivers : 05 - Elatec & WaveID RFID card reader |
| QA-T1032 | Table Queries : 08 - Aggregation types |
| QA-T1035 | Workspaces : 13 - Managing the Workspace Creation Limit through Pricing Plans |
| QA-T1036 | Device Drivers : 06 - Telnet - ZPL (Zebra) Printer |
| QA-T1039 | Driver Configuration : 02 - Disable Drivers from Factory (Windows) |
| QA-T1040 | Driver Configuration : 01 - Enable Drivers from Factory (Windows) |
| QA-T1041 | Table Management: 15 - "Where Used" App links |
| QA-T1044 | Completions - Table Records in Record Placeholders are captured |
| QA-T1062 | Apps Page : 13 - Apps Sorting, Navigation & Searchability |
| QA-T1063 | Triggers - Default value for 'Stop remaining triggers on error' toggle |
| QA-T1064 | Triggers - Functionality of 'Stop remaining triggers on error' toggle |
| QA-T1066 | Workspaces: 1 - Workspace Creation |
| QA-T1067 | Settings SAML Config : 06 / IdP Control Mode Setup |
| QA-T1070 | SSO : 01 - Azure AD SSO Integration |
| QA-T1074 | Workspaces : 14 - Archiving workspaces |
| QA-T1075 | Workspaces : 15 - Archived workspaces appear properly on a User's page |
| QA-T1093 | Triggers - Open Link |
| QA-T1094 | Automations - Automation Management |
| QA-T1095 | Automations Page : 2 - Active / Inactive |
| QA-T1096 | Automations Editor : 1 - Building an Automation |
| QA-T1097 | Automations - Publishing |
| QA-T1100 | Machine Kit : 04 - Setting up Machine Kit with wired AP during Edge device registration |
| QA-T1101 | Machine Kit : 05 - Setup Machine Kit from Quick Configuration page without Node-Red |
| QA-T1103 | Automations Version History Page : 1 - Publishing an Automation |
| QA-T1104 | Automations - Run History |
| QA-T1107 | Apps Directory Page : 14 - Searching for and App |
| QA-T1109 | Apps Directory Page: 15 - Archiving and Restoring Folders and Apps |
| QA-T1115 | Apps Directory Page: 16 - Apps Directory Navigation |
| QA-T1116 | Advanced Analytics : 04 / Trend Line - Moving Average |
| QA-T1117 | Advanced Analytics : 04 - Trend Line - Moving Average |
| QA-T1118 | Apps Directory Page : 17 - Preview Pane Behavior |
| QA-T1122 | Configuration and Apps : 26 - Cognex Insight Camera - No Device Output, or Get Image |
| QA-T1134 | Apps Page : 03 - App Manipulation (New Apps Page) |
| QA-T1136 | Table Management : 16 - Download Dataset |
| QA-T1137 | Edge MC : 01 - No resolution dropdown on Network Settings |
| QA-T1138 | Edge IO : 04 - Device Portal's resolution dropdown without an attached monitor |
| QA-T1139 | Edge IO : 05 - Device Portal's resolution dropdown with an attached monitor |
| QA-T1140 | Machine Monitoring : 11 - Activity fields |
| QA-T1141 | User roles : 09.1 - Operator role |
| QA-T1142 | Apps Directory Page - Viewing Recent Apps |
| QA-T1145 | User roles : 09.2 - Inviting Operator users |
| QA-T1146 | User roles : 09.3 / Operators can't log in to Factory or register a Player |
| QA-T1153 | User Roles : 17.1 - Viewer (with Player Access) role - Settings |
| QA-T1159 | User Roles : 17.2 - Viewer (with Player Access) role - Player, Dashboards, Apps, Analytics |
| QA-T1160 | User Roles : 17.4 - Viewer (with Player Access) role - Machines, Machine Types, Data Sources, Vision |
| QA-T1161 | User Roles : 17.3 - Viewer (with Player Access) role - Tables, Connectors, Stations, Display Devices |
| QA-T1162 | User Roles : 11.1 - Connector Supervisor role - Settings |
| QA-T1163 | User Roles : 11.2 - Connector Supervisor role - Player, Dashboards, Apps, Analytics |
| QA-T1164 | User Roles : 11.3 - Connector Supervisor role - Tables, Connectors, Stations, Display Devices |
| QA-T1165 | User Roles : 11.4 - Connector Supervisor role - Machines, Machine Types, Data Sources, Vision |
| QA-T1166 | User Roles : 12.1 - Tulip Table Supervisor role - Settings |
| QA-T1167 | User Roles : 12.2 - Tulip Table Supervisor role - Player, Dashboards, Apps, Analytics |
| QA-T1168 | User Roles : 12.3 - Tulip Table Supervisor role - Tables, Connectors, Stations, Display Devices |
| QA-T1169 | Edge IO : 03 - eth1 mac address is consistent (release cycle only) |
| QA-T1170 | Other IQC : 2 - eth1 mac address in Edge IO's box and device portal matches |
| QA-T1171 | Apps Directory Page - Viewing Favorite Apps and App Folders |
| QA-T1172 | User Roles : 12.4 - Tulip Table Supervisor role - Machines, Machine Types, Data Sources, Vision |
| QA-T1176 | Automatic Updates of Edge Devices in Factory |
| QA-T1177 | Advanced Analytics : 05 - Reference Line |
| QA-T1179 | Import/Export Connectors |
| QA-T1180 | Apps Directory Page: 20 - Installing apps from Libraries |
| QA-T1181 | Advanced Analytics : 05 / Reference Line |
| QA-T1182 | User Roles : 13.1 - Station Operator role - Settings |
| QA-T1183 | User Roles : 13.2 - Station Operator role - Player, Dashboards, Apps, Analytics |
| QA-T1184 | User Roles : 13.3 - Station Operator role - Tables, Connectors, Stations, Display Devices |
| QA-T1185 | User Roles : 13.4 - Station Operator role - Machines, Machine Types, Data Sources, Vision |
| QA-T1186 | Display Devices Page : 02 / "Registration" column's handling by user role |
| QA-T1191 | User Management: 16 - Logging out of one tab logs out of all tabs |
| QA-T1197 | User Roles : 14.1 - Station Supervisor role - Settings |
| QA-T1198 | User Roles : 14.2 - Station Supervisor role - Player, Dashboards, Apps, Analytics |
| QA-T1199 | User Roles : 14.3 - Station Supervisor role - Tables, Connectors, Stations, Display Devices |
| QA-T1200 | User Roles : 14.4 - Station Supervisor role - Machines, Machine Types, Data Sources, Vision |
| QA-T1201 | User Roles : 15.1 - Administrator role - Settings |
| QA-T1202 | User Roles : 15.2 - Administrator role - Player, Dashboards, Apps, Analytics |
| QA-T1203 | User Roles : 15.3 - Administrator role - Tables, Connectors, Stations, Display Devices |
| QA-T1204 | User Roles : 15.4 - Administrator role - Machines, Machine Types, Data Sources, Vision |
| QA-T1205 | User Roles : 16.1 - Application Approver role - Settings |
| QA-T1206 | User Roles : 16.2 - Application Approver role - Player, Dashboards, Apps, Analytics |
| QA-T1207 | User Roles : 16.3 - Application Approver role - Tables, Connectors, Stations, Display Devices |
| QA-T1208 | User Roles : 16.4 - Application Approver role - Machines, Machine Types, Data Sources, Vision |
| QA-T1209 | User Management: 15 / Login Attempt Rate Limiting |
| QA-T1211 | Analytics - Analytics Widget Font customization |
| QA-T1212 | User Management: 21 - Account owner can register player |
| QA-T1213 | Approval Type - Default Approvers |
| QA-T1214 | SAML : 07 - Roles from SAML Attributes Overwrite Tulip Roles with IdP Control Mode |
| QA-T1216 | User Roles : 10.1 - Application Builder role - Settings |
| QA-T1217 | User Roles : 10.2 - Application Builder role - Player, Dashboards, Apps, Analytics |
| QA-T1218 | User Management: 16 - Create a new user in multiple workspaces |
| QA-T1219 | User Roles : 10.3 - Application Builder role - Tables, Connectors, Stations, Display Devices |
| QA-T1220 | User Roles : 10.4 - Application Builder role - Machines, Machine Types, Data Sources, Vision |
| QA-T1222 | User Roles : 08.2 / Viewers should be unable to create, edit, or modify Tables |
| QA-T1223 | User Roles : 08.3 / Viewers should be unable to create, edit, or modify Connectors and Connector Functions |
| QA-T1224 | User Roles : 08.4 / Viewers should be unable to create, edit, or modify Stations |
| QA-T1225 | User Roles : 08.5 / Viewers should be unable to create, edit, or modify Display Devices |
| QA-T1226 | User Roles : 08.6 / Viewers should be unable to create, edit, or modify Machines |
| QA-T1227 | User Roles : 08.7 / Viewers should be unable to create, edit, or modify Machine Types |
| QA-T1228 | User Roles : 08.8 / Viewers should be unable to create, edit, or modify Machine Data Sources |
| QA-T1229 | User Roles : 08.10 / Viewers should not be able to access Vision |
| QA-T1230 | User Roles : 08.9 / Viewers should be unable to update Edge Devices |
| QA-T1231 | User Roles : 08.11 / Viewers cannot register Players |
| QA-T1232 | User Roles : 18.1 - Application Engineer role - Settings |
| QA-T1234 | User Roles : 18.3 - Application Engineer role - Tables, Connectors, Stations, Display Devices |
| QA-T1235 | User Roles : 18.4 - Application Engineer role - Machines, Machine Types, Data Sources, Vision |
| QA-T1236 | User Roles : 19.2 - Workspace Owner role - Player, Dashboards, Apps, Analytics |
| QA-T1237 | User Roles : 19.3 - Workspace Owner role - Tables, Connectors, Stations, Display Devices |
| QA-T1238 | User Roles : 19.4 - Workspace Owner role - Machines, Machine Types, Data Sources, Vision |
| QA-T1239 | User Management: 17 - Search for user across workspaces |
| QA-T1240 | User Management: 18 - Change a user's roles in multiple workspaces |
| QA-T1241 | User Roles : 19.1 - Workspace Owner role - Settings |
| QA-T1242 | User Management: 19 - Give a user with workspace-bounded roles the Account Owner role |
| QA-T1249 | Excluding non-workspace members from user table |
| QA-T1251 | Activity history is workspace scoped |
| QA-T1252 | Workspaces : 16 - Archived Workspaces do not Appear in Workspace Selectors |
| QA-T1253 | User Management: 20 - Validate interaction between user deactivation and creation |
| QA-T1254 | Workspaces : 17 - Apps can Only be Assigned to Stations in the Same Workspace |
| QA-T1255 | Misc Tests - Logged In User is displayed when logged into Factory and Player |
| QA-T1256 | Machine Kit : 01 - Edge MC Machine Kit box contents |
| QA-T1259 | Verify MQTT Data Sources on Tulip Edge IO Device |
| QA-T1277 | Duplicate roles |
| QA-T1278 | Configuration and Apps : 14B - Test change detection |
| QA-T1279 | Can assign custom roles |
| QA-T1280 | Universal Template - Data types : 01 - Table-based analysis |
| QA-T1281 | Single Value visualization shows label instead of value |
| QA-T1282 | Creating Global and Worksapce-Scoped API Tokens |
| QA-T1283 | Advanced Analytics : 08 - Analytics Dashboard Performance |
| QA-T1284 | Input Validation - Number Input Widget Configuration |
| QA-T1285 | Can archive roles |
| QA-T1286 | Pre-auth : 02 - Setup Step 1 - Setting up a password for IOGateway |
| QA-T1287 | Pre-auth : 10 - Mac address for IOGateway |
| QA-T1288 | Can bulk-assign roles |
| QA-T1289 | User Roles : 24 - Roles page is available even with the customUserRoles FF off |
| QA-T1290 | Module : 1 - Edge PaaS - Module Creation |
| QA-T1291 | Module : 2 - Edge PaaS - Module Updates |
| QA-T1292 | Module : 3 - Edge PaaS - Module Disable |
| QA-T1293 | Module : 4 - Edge Paas - Module Enable |
| QA-T1294 | Input Validation - Text Input Widget Configuration |
| QA-T1295 | Input Validation - Number Input Widget Run in Player |
| QA-T1311 | Number input widgets for different language locales |
| QA-T1312 | Input Validation - Single Select Input Widget Configuration |
| QA-T1313 | Input Validation - Multiselect Input Widget Configuration |
| QA-T1314 | Input Validation - Checkbox Input Widget Configuration |
| QA-T1315 | Input Validation - Signature Input Widget Configuration |
| QA-T1318 | Input Validation - Image Input Widget Configuration |
| QA-T1319 | Input Validation - File Input Widget Configuration |
| QA-T1321 | Input Validation - Date Picker Input Widget Configuration |
| QA-T1324 | Settings page: Edge Device Settings |
| QA-T1325 | Input Validation - Checkbox Input Widget Run in Player |
| QA-T1326 | Input Validation - Signature Input Widget Run in Player |
| QA-T1327 | Post-auth : 23 - Device Portal - Date time set fallback - IO Gateway |
| QA-T1329 | Input Validation - Single Select Input Widget Run in Player |
| QA-T1330 | Input Validation - Multiselect Input Widget Run in Player |
| QA-T1331 | Input Validation - Date Picker Input Widget Run in Player |
| QA-T1332 | Other IQC : 3 - IQC - Setting up and testing Current Clamp with Edge MC and Machine Kit Node-RED flow |
| QA-T1333 | Input Validation - Image Input Widget Run in Player |
| QA-T1334 | Automations : 1 - Scheduled Automation |
| QA-T1335 | Input Validation - File Input Widget Run in Player |
| QA-T1336 | Single / mutli select input widget overflow behavior |
| QA-T1341 | Input Validation - Trigger |
| QA-T1342 | Enabled State - Button - Static value and variable |
| QA-T1343 | Enabled State - Signature - Static value and variable |
| QA-T1344 | Enabled State - Button - Input validity |
| QA-T1345 | Enabled State - Button - Expression |
| QA-T1346 | Enabled State - Signature - Input validity |
| QA-T1347 | Enabled State - Signature - Expression |
| QA-T1348 | Settings - Player toast duration |
| QA-T1353 | Can archive and restore user groups |
| QA-T1355 | User Management: 21.1 - Account owner can assign player to an existing station |