QA-T34
Pre-auth : 06 - Setup Step 2 - Network Configuration (different static IP to DHCP)
OBJECTIVE
Additional detail to help the purpose of the test be clear:
The purpose of this test is to verify that switching from Static IP to DHCP works as intended.
critical criteria of test (CCT)
The purpose of this test is to verify that switching from Static IP to DHCP works as intended.
critical criteria of test (CCT)
- Network interface eth0 receives network config values through DHCP
PRECONDITION
- The Edge Device currently has a static IP and this static IP is not the same as the DHCP IP originally issued to the Edge Device (QA-T36 (1.0) have been run previously)
- If the tester is using an IOGateway, it is connected through the wired LAN
- If the tester is using an EdgeIO or EdgeMC the connection could be Wireless
- The tester knows the edge Device's password and is logged into the Edge Device via http://10.0.3.1/ and currently in the Network configuration step (2/4) of the setup
- If the tester is using an IOGateway, it is connected through the wired LAN
- If the tester is using an EdgeIO or EdgeMC the connection could be Wireless
- The tester knows the edge Device's password and is logged into the Edge Device via http://10.0.3.1/ and currently in the Network configuration step (2/4) of the setup
Covers
routes